Asset Publisher

VDMA warns against deadlock in Brexit negotiations
The tricky Brexit negotiations between the EU and the United Kingdom are a source of concern for mechanical engineering companies in Germany.
VDMA: Politicians must speed up the broadband expansion!
Hartmut Rauen, Deputy Executive Director of the VDMA, accuses policymakers of recklessly putting the competitive opportunities of industrial medium-sized companies at risk during the expansion of Industrie 4.0. “Germany needs to shift up a gear especially in the field of broadband expansion,” demands Rauen.
ASEAN states continue to offer opportunities
Machinery exports to South East Asia are increasing, but growth by competitors from China and Korea is significantly stronger
Production in mechanical engineering kicks into gear
The effects of the improved market situation in many important sales regions are leaving their mark on the production of mechanical engineering companies in Germany. According to preliminary figures for the first half of 2017, companies ramped up their production capacities by 2.4 percent (adjusted for price) compared to previous year’s levels.
VDMA: Russia must not become a second Iran
Mechanical engineers disapprove of the new US sanctions resolutions against Russia
Incoming orders in mechanical engineering June 2017 – Mechanical engineering starts full-swing into the second half of the year
Mechanical engineering companies in Germany are optimistic for the second half of the year. In the first half of 2017, incoming orders rose by four percent in real terms.

News

14.02.2018
The German construction equipment industry ended 2017 with turnover of 10.8 billion euros – an increase of 15 percent compared to the previous year. It is the fourth consecutive year of growth for the sector. Incoming orders were 19 percent higher by the end of the year. 2018 is therefore expected to be another good year, with the industry predicting an eight percent increase in turnover.
08.02.2018
Preliminary calculations by the Federal Statistical Office indicate that, adjusted for price, production in mechanical engineering rose by 3.1 percent last year, reaching a volume of around 212 billion euros thus exceeding the three percent growth predicted by VDMA's economists.
07.02.2018
"The new government is going in the right direction with their commitment to efficiency and faster grid expansion for more renewable energy, but much more consistency is needed."
06.02.2018
Incoming orders in the mechanical engineering sector in Germany increased by 7 percent in real terms in December compared to the previous year. Orders from abroad recorded an increase of 5 percent.
05.02.2018
“The German machine tool industry is setting one production record after another.” With this good news, Dr. Heinz-Jürgen Prokop, Chairman of the VDW (German Machine Tool Builders’ Association), Frankfurt am Main, opened the organisation’s annual press conference. In 2017, the sector achieved growth of four per cent, and will thus, according to the provisional results, reach a volume of around 15.7 billion euros. For 2018, the VDW is expecting production output to increase by another five per cent.
05.02.2018
Im vierten Quartal 2017 stieg der Auftragseingang der deutschen Werkzeugmaschinenindustrie im Vergleich zum Vorjahreszeitraum um 24 Prozent. Dabei legten die Bestellungen aus dem Inland um 48 Prozent zu. Die Auslandsorders wuchsen um 13 Prozent. Für 2017 gilt insgesamt ein Plus von 8 Prozent. Dabei kletterten die Inlandsaufträge um 10 Prozent nach oben, während die Auslandsbestellungen mit 7 Prozent Plus abschlossen. Hier positionierten sich die Euroländer als Zugpferd.
26.01.2018
In just under 100 days from now, the European General Data Protection Regulation will come into force. The European Commission has now published guidelines to ensure a smooth implementation.
22.01.2018
VDMA Chief Economist Dr. Ralph Wiechers on the new outlook for the world economy:
18.01.2018
With a total output capacity of more than 5.3 GW, offshore wind turbines make an increasing contribution to the security of Germany’s energy supply.
17.01.2018
Industry performs better than expected. Prices of raw material and a shortage of skilled workers are dampening the mood.
16.01.2018
The German Maritime LNG Platform and VDMA have agreed a collaborative partnership. By co-operating and mutually supporting each other, the Platform’s Managing Director, Tessa Rodewaldt, and the Managing Director of VDMA Engines and Systems, Peter Müller-Baum, envision a range of constructive opportunities to jointly drive forward future innovation in the shipping sector.
16.01.2018
The EU hopes to reduce or entirely do away with plastic waste in Europe. In view of VDMA, this initiative can indeed help leverage existing potentials.
04.01.2018
Investments by the solar industry in thin film technology contribute disproportionately to success, record export rate of 81 percent, incoming orders declined after a strong start in 2017
21.12.2017
One year after presenting the Clean Energy Package, the EU Energy Ministers have discussed the outstanding central points and agreed on common positions on the topics of the internal market in electricity, governance regulations and support of renewable energies.
12.12.2017
Sales in mechanical engineering sector surpass EUR 220 billion mark for the first time in 2017- Increase in sales to more than EUR 230 billion expected for 2018
22.11.2017
The Federal Network Agency (BNetzA) today published the results of the third and final EEG (Renewable Energies Act) bidding round for onshore wind energy in 2017
21.11.2017
Electric power as the foundation for other forms of energy provides solutions for a wide range of applications - Mechanical engineering is a key industry for climate protection - Third VDMA Future Business Summit presents scenarios and potential opportunities for the mechanical and plant engineering industry
13.11.2017
Good times for the European agricultural machinery industry – profitable harvests and reasonable prices for agricultural products, particularly milk and forage crops, have fuelled the demand for innovative agricultural machinery and tractors in numerous key markets.
02.11.2017
In September, incoming orders in the mechanical engineering sector continued their growth trajectory, gaining around 12 percent in real terms in comparison with the previous year.
26.10.2017
The construction equipment and building material machine industry is performing well so far in 2017. “Although there is more chaos in the world today than ever before, we have thus far managed to cope with all the challenges that have come in rapid succession,” emphasized Johann Sailer, Chairman of the VDMA Construction Equipment and Building Material Machinery Association at the Association’s general meeting on October 26 in Düsseldorf.
20.10.2017
VDMA views with cautious optimism the fact that the remaining EU Member States are willing to start preparations to negotiate the future trading relationship between the EU and UK.
16.10.2017
Exports increased in the first half of 2017 • Top 3 of the sales markets continue to grow • Focus Fakuma: Injection moulding machine exports with considerable plus
13.10.2017
People travel, use raw materials and live with digitalization. People need clean air. But how is all this being assured? On www.mensch-maschine-fortschritt.de, the VDMA presents four new multimedia reports with answers to questions that arise in our daily lives.
11.10.2017
Batteries are not only of crucial significance for E-Mobility - they are one of the key technologies. Against this background it is absolutely necessary to further develop the battery as an important power-component and to lower its costs in the future.
Thilo Brodtmann: Koalitionsvertrag - Zaghaft und visionslos
VDMA-Hauptgeschäftsführer Thilo Brodtmann analysiert das Verhandlungsergebnis von Union und SPD zur Neuauflage der Großen Koalition.
Dr. Ralph Wiechers: Auftragseingang Dezember 2017
Die Auftragseingänge im Maschinenbau in Deutschland sind im Dezember um real 7 Prozent im Vergleich zum Vorjahr gestiegen. Die Auslandsbestellungen verbuchten ein Plus von 5 Prozent. Dabei kamen die Impulse allein aus den Nicht-Euro-Ländern (plus 10 Prozent).
Thilo Brodtmann: Koalitionsvertrag - Zaghaft und visionslos
VDMA-Hauptgeschäftsführer Thilo Brodtmann analysiert das Verhandlungsergebnis von Union und SPD zur Neuauflage der Großen Koalition.
Dr. Ralph Wiechers: Auftragseingang Dezember 2017
Die Auftragseingänge im Maschinenbau in Deutschland sind im Dezember um real 7 Prozent im Vergleich zum Vorjahr gestiegen. Die Auslandsbestellungen verbuchten ein Plus von 5 Prozent. Dabei kamen die Impulse allein aus den Nicht-Euro-Ländern (plus 10 Prozent).

Must Reads

21 company representatives came together on November 28 for the inaugural meeting of the new committee. The focus is on sustainability requirements and the increasing duties of care throughout the delivery chain, as well as the strategic integration of sustainability in the company.
06.09.2017
The update of the ITRPV will be presented and released on September 6th, 2017 in Shanghai. The information on the technology maturity is now implemented for selected parameters.
09.08.2017
Cybersecurity is vital when it comes to preparing for digitalization, which continues to be an unstoppable force in mechanical engineering.
10.02.2015
VDMA’s fears that a common European Sales Law would increase transaction costs and legal uncertainty, and would therefore not be a true added-value for companies, have been recognised by decision makers in Brussels.
Humans – Machines – Progress – The film
Machines improve our lives – on a large and small scale. Whether for our health, food or the many means of transportation that we use; whether we are looking at the ground deep below the sea or from high above – we need machines and people who utilize their skills to make the world a better place to live. That is the aim of mechanical and plant engineering. Humans – Machines – Progress.
What humans create with machines
What are the biggest challenges facing mankind? And what contribution are machines and mechanical engineers already making today to solve them? VDMA has been providing the general public with knowledge on mechanical engineering for 125 years.
The VDMA Startup Machine goes live
In the year of its 125th anniversary, the VDMA is launching its Startup Machine: a new grouping that intends to bring together start-up companies and mechanical engineering companies.
Europe – Trailblazer for democracy and digitalization
Mechanical engineers and all other companies in Europe agree that democracy is the necessary basis for the domestic market. And digitalization opens the doors to new ideas, technologies and customers. Europe was the pioneer of democracy and Europe also wants to be a pioneer of digitalization.